EI50 magnetic core high frequency transformer production

2019-05-13 14:58:49 JUKE CHINA ODM OEM Transformer factory Read

EI50 magnetic core High frequency transformer production
EI50 magnetic core high frequency transformer production.jpg

N1=28匝: primary winding (flat winding)
Use φ0.33x4 strands to wrap around 14匝 in the inner layer.
N2=5匝: auxiliary power supply winding
Use φ0.5 to wrap 5 匝 any end of the same name
N3=8匝: secondary winding (flat winding)
匝0.38x8 shares around 8匝
N4=8匝: secondary winding (flat winding)
匝0.38x8 shares around 8匝

Technical requirements: magnetic core and magnetic core without air gap
Keep tightly closed so that the N1 inductance is greater than 4mH.
Note: insulation must be insulated between the windings and the windings